Winches

The Keeper® ¾ in. Heavy-Duty Bow Shackle is recommended for all winches. The bow shackle consists of a threaded removable pin and an “O” shaped loop at the top to allow cargo loads easy access from any direction.

View Full Details

Keeper’s Synthetic Rope is to be used on winches up to 6,000 lbs. This Hi-Viz orange rope comes with a thimble hook. It is made of Ultra-High Molecular Weight Polyethylene Rope (UHMWPE).

View Full Details

The Keeper Pulley Block is engineered for Keeper winches up through 6,000 lbs. The pulley block allows the winch user to double the pulling capacity of their winch. It is also equipped with a built-in clevis hook and safety latch to make setup more efficient.

View Full Details

To keep your winch in top running condition we offer the 12V Switching Solenoid that works with the KT2500, KT3000, and KT4000 models. The Replacement Solenoid can be mounted anywhere within a 4 ft. range. This allows for custom mounting positions based on the application in which the winch is being used.

View Full Details

Keeper's Handheld Lighted Remote features a high-density work light built-in on 15 ft. lead and functions as a replacement handheld switch for the KT4000 and all KW winches. The quick response of the handheld remote allows you to have complete and accurate control over the winch. The high-density LED work light provides sufficient lighting in poorly lit areas.

View Full Details

The Lightweight 2 in. Receiver Hitch Mount is designed for the portable use of the KT2000, KT3000, and KT4000 and KU series winches. The Receiver Hitch Mount allows the user to mount the winch with mounting plate (not included) directly to it for portable use wherever a 2 in. receiver hitch installed.

View Full Details

The Keeper 2 in. Receiver Hitch mount fits standard Class III receiver hitches and provides a secure anchor point for bow shackles and soft shackles to provide a safe and secure recovery point.

View Full Details

The Keeper® 6 ft. Winch Strap-Tree Saver is designed for roadside emergencies and recoveries. The strap features abrasion-resistant Hi-Test® webbing that will not rust, rot or mildew. The strap is a great chain alternative that is lightweight, portable and can be easily stored in the trunk or tool box.

View Full Details

The Keeper 20,000 lbs. Capacity Pulley Block Assembly is designed for winches up to 10,000 lbs. pulling capacity. The Pulley Block allows the winch user to double the pulling capacity of his winch. It is also equipped with a built-in clevis hook and safety latch to make setup more efficient.

View Full Details

A fraying wire rope can put you at risk of injury when using your winch. Replace your existing wire rope with our Galvanized 21//64” x 100 ft. Wire Rope. Recommended as a replacement for the KX Series of winches.

View Full Details

The Keeper® 6 ft. Winch Strap is designed for roadside emergencies and recoveries. The strap features abrasion-resistant Hi-Test® webbing that will not rust, rot or mildew. The Winch strap is a great chain alternative, it is lightweight, portable and can be easily stored in the trunk or tool box.

View Full Details

Keeper’s Synthetic Rope is to be used on winches up to 8,500 lbs. to 13,500 lbs. This Hi-Viz orange rope comes with a thimble hook. It is made of Ultra-High Molecular Weight Polyethylene Rope (UHMWPE).

View Full Details

Keeper's Pulley Block fits all winches up to 18,000 lbs. capacity. This premium pulley block doubles the winch pulling capacity, achieving up to 36,000 lbs. in pulling power. Features integral connectors for straps and chains and includes grease fitting for easy maintenance.

View Full Details

The Galvanized Wire Rope features 50 ft. long by 5/32 in. in diameter with an attached clevis hook with safety latch. The Galvanized Wire Rope is a replacement necessity for maintaining and up keeping the winch.

View Full Details

The Galvanized Wire Rope is 50 ft. long by 3/16 in. in diameter with a loop on one end. The Galvanized Wire Rope is a replacement necessity for maintaining and up keeping the winch.

View Full Details

The Galvanized Wire Rope is 55 ft. long by 7/32 in. in diameter with a loop on one end. The Galvanized Wire Rope is a replacement necessity for maintaining and up keeping the winch.

View Full Details

The Emergency Shut-Off for 6 AWG Wire provides easy access to disconnect from the main power supply. It can be used with winches up to 6,000 lbs. The switch prevents tampering with the winch when not in use.

View Full Details

The Trailer Wiring Kit 6 AWG 25 ft. and 6 ft. with Quick Connect is recommended for all KT and KU winches. The 6 AWG is color coded, and the quick connects allows the user to quickly connect and disconnect from the winch’s power source. The Trailer Wiring Kit with Quick Connects includes everything that the user would need to allow for the portable use of their winch.

View Full Details

The Quick Connect for 6 AWG is essential to make any KT winch portable. The Quick Connect allows the user to quickly connect and disconnect from the winch’s power source. (Trailer Wiring Kit 6 AWG @ 25 ft. & 6 ft. with Quick Connect).

View Full Details

The Seven Pin Plug with 5’ Pig Tail allows for the Keeper Winch Wireless Remote to be installed with the KT3000 Winch. It's also a replacement part for the KT4000, which enables the winch user to install a wireless remote and forgo the wired remote that comes with the product.

View Full Details

The ATV 4-Way Roller Fairlead is recommended to fit KT2000, KT3000 winches and to be mounted on the KTA502 Flat Mounting Plate. The fairlead reduces binding and friction caused by pulls at certain angles to extend the lifespan of the galvanized wire rope and improve safety while operating the winch.

View Full Details

The Keeper Black Powder Coated Hawse Fairlead is designed for all weather conditions and is black to match the color of your black bumper. Hawse fairleads are designed for synthetic rope and reduces friction during less than straight pulls It's designed to fit Keeper's KV, KW and KX series winches (excluding KW7.5RM).

View Full Details

The Circuit Breaker is a replacement part for the KT2000 winch. It is an essential part in preserving the life of the winch. If the circuit breaker is not used in the KT2000 the winch could over heat, causing significant damage.

View Full Details

The 2 GA Quick Connect for 2 to 4 AWG is essential to make any winch over 7,5000 lbs. portable. The quick connect allows the user to quickly connect and disconnect from the winch’s power source. The quick-connect can also be used as a replacement for the KWA14607 Keeper Trailer Wiring Kit 2 AWG. Combine with our hitch mount receiver, and you can easily switch your winch from vehicle to vehicle.

View Full Details

The Emergency Shut-Off Switch for 2 AWG Wire provides easy access to disconnect your winch from the main power supply. The switch prevents tampering with the winch when not in use. Compatible with all winches up to 17,500 lbs.

View Full Details

The Keeper Flat Mount Plate is a direct replacement for the stock plate that comes with the winch. Designed for the KT2000 and KT3000 winches. The mount includes a built-in bracket to mount the roller fairlead. The Flat Mount Plate is ideal for mounting the winch and a roller fairlead to any trailer.

View Full Details

The Keeper Flat Mount Plate is a direct replacement for the stock plate that comes with the winch. Designed for the KT4000 and KU Series winches. The mount includes a built-in bracket to mount the roller fairlead. The Flat Mount Plate is ideal for mounting the winch and a roller fairlead to any trailer.

View Full Details

The integrated heavy-duty handheld switch allows the user to get the most precision while controlling the KT2000 Winch. The 5.5 ft. lead enables the user to stand a safe distance away from the winch during operation while the rugged structure helps defend against vigorous everyday use.

View Full Details

All-weather finish heavy-duty Clevis hook for all 9,500 lbs. or less winches, such as the KX Series winches, gives additional protection in a rugged working environment.

View Full Details

The Heavy-Duty 4-Way Roller Fairlead is recommended for the KT4000 and all KU Series winches. The fairlead reduces binding and friction caused by pulls at certain angles to extend the lifespan of the galvanized wire rope and improve safety while operating the winch.

View Full Details

The Keeper Heavy-Duty Bow Shackle is recommended for all winches. The bow shackle consists of a threaded removable pin, and an “O” shaped loop at the top to take loads from many different directions. The isolator prevents distracting rattling sounds and marring to bumper.

View Full Details

The Keeper Heavy-Duty Flat Winch Mounting Plate is designed for larger winches and is essential for mounting the KV Series, KW Series and all KX inches. It is ideal for mounting the winch and a roller fairlead to any trailer. Included is a built-in bracket to mount the roller fairlead.

View Full Details

Maintain control of your winch while in the driver’s seat with the touch of a button by installing the Keeper® Integrated Heavy-Duty Mini Rocker Switch Handheld Remote. It simply mounts to the handlebars of most ATVs. This accessory is a replacement for the included switch on the KT3011000 and KT4000 winch.

View Full Details

The Replacement Brush Set is engineered specifically to Increase the longevity of the KAC1500 winch. When the winch starts to lose performance, the Replacement Brush Set, once installed, can revive the winch’s motor back to its original “New, Out of the Box” state. This accessory is essential for maintaining and Increasing the life of the KAC1500 winch.

View Full Details

Keeper KAC1500 Electric Winch is the perfect addition to any garage or workshop, packed with all the features needed for an easy and safe operation. Built for 1,500 lbs. single layer line pull. The electric winch is equipped with an 8 ft. power cord compatible with 110/120V AC 3-prong outlet rated for 15 amps or higher. The 1.2 HP 120V AC motor draws 9.2 amps at full load with quick change brush caps. Installation is easy with the supplied mounting plate, cable tension plate, and mount for the 4-way roller fairlead. Comes with 42 ft. of 3/16 in. galvanized wire rope with a hook and safety latch. To operate, use the handheld pendant which includes power in/out, resettable emergency shut-off switch, thermal motor reset button, and 12 ft. cord for free movement while operating. Additional Features - The electric winch has a 3-stage planetary gear box, 262:1 gear ratio, and all metal gear train. Full-load holding mechanical brake for safety. ETL-certified to meet UL and CSA standards.

View Full Details

The Keeper KM2000 Winch is designed with tough terrain and off-roading situations in mind. This unit provides power, versatility, and durability that is essential for ATV users, trailers, and even portable winch applications. The winch features a 1.0 HP 12V DC permanent magnet motor, dynamic full load brake, and a 2,000 lbs. single line pull rating to ensure reliable winching every time.

View Full Details